LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> M37 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Security Control System) >> DTC/Circuit Diagnosis >> DTC B260F: Engine Status >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECTION START
    1. Turn ignition switch ON.
    2. Select "Self Diagnostic Result" mode of "BCM" using CONSULT.
    3. Touch "ERASE".
    4. Perform DTC CONFIRMATION PROCEDURE for DTC B260F Refer to "DTC LOGIC ".

      Is DTC detected? 

      YES: GO TO 2.

      NO: INSPECTION END

  2. REPLACE ECM
    1. Replace ECM. Refer to "REMOVAL AND INSTALLATION ".
    2. Perform "ADDITIONAL SERVICE WHEN REPLACING ECM". Refer to "WORK PROCEDURE ".

      : INSPECTION END

scientia non olet · About LEMON Manuals