LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> M45 Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Auto Cruise Control System >> LDW & LDP >> Symptom Diagnosis >> LDW & LDP System Symptoms >> Symptom Table

Symptom Table

CAUTION: Perform the self-diagnosis with CONSULT-III before the symptom diagnosis. Perform the trouble diagnosis if any DTC is detected.
SYMPTOM TABLE

Symptom Possible cause Inspection item/Reference
Indicator/warning lamps do not illuminate when ignition switch OFF ==> ON. Lane departure warning lamp (Yellow) does not illuminate.
  • Harness between lane camera unit and combination meter.
  • Lane departure warning lamp (Combination meter)
  • Lane camera unit
LANE DEPARTURE WARNING LAMP CIRCUIT 
LDP ON indicator lamp (Green) does not illuminate.
  • Harness between lane camera unit and combination meter.
  • LDP ON indicator lamp (Combination meter)
  • Lane camera unit
LDP ON INDICATOR LAMP CIRCUIT 
LDW ON indicator (on the LDW switch) does not illuminate.
  • Harness between lane camera unit and LDW switch.
  • LDW ON indicator (LDW switch)
  • Lane camera unit
LDW ON INDICATOR CIRCUIT 
Lane departure warning lamp (Yellow) and LDP ON indicator lamp (Green) do not illuminate.
  • Power supply and ground circuit of combination meter
  • Combination meter
  • Lane camera unit
POWER SUPPLY AND GROUND CIRCUIT INSPECTION
All of indicator/warning lamps do not illuminate;
  • Lane departure warning lamp (Yellow)
  • LDP ON indicator lamp (Green)
  • LDW ON indicator
  • Power supply and ground circuit of lane camera unit
  • Lane camera unit
POWER SUPPLY AND GROUND CIRCUIT 
LDW system is not activated. (Indicator/warning lamps illuminate when ignition switch OFF ==> ON.) LDW ON indicator is not turned ON <==> OFF when operating LDW switch.
  • Harness between lane camera unit and LDW switch.
  • Harness between LDW switch and ground.
  • Lane camera unit
LDW SWITCH CIRCUIT 
Lane departure warning buzzer is not sounding. (Lane departure warning lamp is activated.)
  • Harness between the fuse and lane departure warning buzzer.
  • Harness between lane camera unit and lane departure warning buzzer.
  • Harness between lane departure warning buzzer and ground.
  • Lane departure warning buzzer
  • Lane camera unit
LANE DEPARTURE WARNING BUZZER CIRCUIT 
Lane departure warning lamp is not activated. (Lane departure warning buzzer is sounding.) Lane camera unit -
LDP system is not activated. (LDW system is functioning normally) LDP ON indicator lamp is not turned ON <==> OFF when operating LDP ON switch. LDP ON switch (ICC steering switch) LDP ON switch (ICC steering switch)
Warning is functioning but yawing is not functioning. -
Yawing is functioning but warning is not functioning.
  • ABS actuator and electric unit (control unit)
  • Lane camera unit
-
Warning functions are not timely.
(Example)
  • Does not function when driving on lane markers.
  • Functions when driving in a lane.
  • Functions in a different position from the actual position.
  • Camera aiming adjustment
  • Lane camera unit
INSPECTION AND ADJUSTMENT 
Functions when changing the course in direction of the turn signal. Turn signal
  • BCM
  • Lane camera unit
Lane camera unit
Data monitor "TURN SIGNAL"