LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2007 >> G35 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 142 (Engine Control System - DTCS P0850 Through P2A03 (Coupe)) >> DTC P2138: App Sensor >> CONSULT-II Reference Value in Data Monitor Mode

CONSULT-II Reference Value in Data Monitor Mode

WARNING: This page is about a different car, the 2006 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.

Specification data are reference values.

CONSULT-II REFERENCE VALUE CHART

MONITOR ITEM CONDITION SPECIFICATION
ACCEL SEN 1
  • Ignition switch: ON (Engine stopped)
 Accelerator pedal: Fully released 0.5 - 1.0V
Accelerator pedal: Fully depressed 4.0 - 4.8V
ACCEL SEN 2(1)
  • Ignition switch: ON (Engine stopped)
 Accelerator pedal: Fully released 0.3 - 1.2V
Accelerator pedal: Fully depressed 3.9 - 4.8V
CLSD THL POS
  • Ignition switch: ON (Engine stopped)
 Accelerator pedal: Fully released ON
Accelerator pedal: Slightly depressed OFF
(1) Accelerator pedal position sensor 2 signal is converted by ECM internally. Thus, it differs from ECM terminal voltage.
scientia non olet · About LEMON Manuals