DTC P0444 & P0445 EVAP Canister Purge Volume Control Solenoid Valve: Wiring Diagram

NOTE: For system wiring diagrams, see SYSTEM WIRING DIAGRAMS .

Fig 1: EVAP Canister Purge Volume Control Circuit

Courtesy of NISSAN MOTOR CO., U.S.A.

Specification data are reference values and are measured between each terminal and ground. Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECM's transistor. Use a ground other than ECM terminals, such as the ground.

Fig 2: ECM Terminal 45, 111, 119 & 120 Specifications

Courtesy of NISSAN MOTOR CO., U.S.A.