Procedure For Malfunction B

WARNING: This page is about a different car, the 2004 Infiniti FX45. However, it is still accessible from the selected car via links, so may be relevant.

With CONSULT-II

Turn ignition switch ON.
Select DATA MONITOR mode with CONSULT-II. See Figure .
Maintain the following conditions for at least 10 consecutive seconds.

Fig 1: Identifying Malfunction B Conditions
Courtesy of NISSAN MOTOR CO., U.S.A.
If the 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE .

With GST

Follow the procedure With CONSULT-II above.