Engine Mounting Bracket

Remove the Engine Room Under Cover.
(Refer to Engine and Transaxle Assembly - "ENGINE ROOM UNDER COVER ")
Install the jack to the edge of upper oil pan to support the engine.

Courtesy of HYUNDAI MOTOR AMERICA

NOTE: Insert the rubber block between jack and oil pan.
Remove the engine mounting support bracket (A).
Tightening Torque:

88.3 - 107.9 N.m (9.0 - 11.0 kgf.m, 65.1 - 79.6 lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA
Remove the engine mounting bracket (A).
Tightening Torque:

63.7 - 83.3 N.m (6.5 - 8.5 kgf.m, 47.0 - 61.5 lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.