| Main action |
|
- Faulty ESP (ESC)
- Variant coding is not finished.
- CAN Bus "OFF"
- A different type control module is installed.
|
| Threshold value |
- When variant coding is not completed.
- A failure is detected when the data for variant coding does not correspond to stored variant code in EEPROM, after ignition switch is turned ON.
|
| Diagnosis time |
|
| MIL |
- EBD/ABS/ESP (ESC)/DBC operation allowed.
- BRAKE/ABS/ESP (ESC)/DBC warning lamps ON
|
| Reset condition |
- When the normal state is confirmed after ignition switch turned OFF and back ON.
|