LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Veloster Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Keyless Entry And Burglar Alarm >> Repair Procedures >> Inspection >> Tailgate Open Switch Inspection

Tailgate Open Switch Inspection

  1. Remove the tailgate trim.

    (Refer to TAIL GATE .)

  2. Disconnect the 4P connector from the actuator.
    Fig 1: Locating Tailgate Open Switch Connector Terminals
    G12126293Courtesy of HYUNDAI MOTOR AMERICA
  3. Check for continuity between the terminals in each switch position according to the table.
Fig 2: Tailgate Open Switch Connector Terminals Continuity Chart
G12126294Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals