DTC B1605-00: CAN Timeout Between IPM And DDM: General Description
This is DTC which is related with communication error between BCM and other units.
* Body CAN communication Control Units: BCM (Body Control Module), DDM (Drive Door Module), ADM (Assist Door Module), SJB (Smart Junction Box), SMK (Smart Key Module)
*1 CAN (Controller Area Network): CAN is serial bus communication type which links not only communication system but also control units each other.
*2 LIN (Local Interconnect Network): LIN is serial communication type which is used in electrical control system. (This is less expensive.)