General Information: DTC Detecting Condition

DTC DETECTING CONDITIONS

Item		Detecting Condition	Possible Cause
DTC Strategy		Signal plausibility check	Open or short in signal, ground or power supply circuit Poor connection or damaged harness Damage to the connecting flange/flywheel Misadjusted crankshaft and camshaft pulley position Faulty CKP sensor
Enable Conditions		Engine synchronized Engine speed > 512 rpm
Threshold Value	Case 1)	Tooth number check (Number of missing/additional teeth > 1)
Threshold Value	Case 2)	Tooth number check (Number of missing/additional teeth > 2)
Diagnostic Time	Case 1)	5 rev.
Diagnostic Time	Case 2)	3 rev.
MIL On Condition		2 Driving Cycles