LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Genesis 5.0 R-Spec >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Engine Control System - 3.8L) >> Variable Intake Solenoid (VIS) Valve >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the variable intake solenoid valve connector (A).
  3. Disconnect the vacuum hoses (B, C) from the valve.
  4. Remove the installation nut (D), and then remove the valve from the surge tank.
    Fig 1: Identifying Variable Intake Solenoid Valve Connector, Vacuum Hoses And Mounting Bolts
    G08834222Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals