LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Genesis 5.0 R-Spec >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Engine Control System - 3.8L) >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air cleaner assembly (Refer to "INTAKE AND EXHAUST SYSTEM " in EM group).
  3. Disconnect the crankshaft position sensor connector (A).
  4. Remove the installation bolt (B), and then vertically remove the sensor from the transaxle housing.
    Fig 1: Identifying Crankshaft Position Sensor Connector And Mounting Bolts
    G08834153Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals