LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2009 >> Genesis 3.8 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> BCM (Body Control Module) >> Troubleshooting >> B1611 CAN Time-out FAM >> DTC Detecting Condition

B1611 CAN Time-out FAM: DTC Detecting Condition

B1611 CAN TIME-OUT FAM

Item Detecting Condition Possible Cause
DTC Strategy
  • CAN Comm. Check (IPM ↔ FAM)
  • IG ON
    1. No receiving CAN Data owing to BUS OFF (Check CAN B-US ERROR DTC is being.)
    2. IPM CAN High/Low Lines open together
    3. Check FAM (Including the related fuses)
    4. FAM CAN High/Low Lines open
Enable Conditions
  • IPM power on
Threshold Value
  • No message from FAM to IPM for 10 sec.
Diagnostic Time
  • 10 sec
DTC Erasing Time
  • DTC is erased immediately after receiving data from F-AM.
scientia non olet · About LEMON Manuals