LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2008 >> Tucson GLS, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G4GC - GSL 2.0) >> DTC Troubleshooting Procedures >> DTC P0130 Ho2S Circuit (Bank 1/Sensor 1) >> Signal Circuit Inspection

Signal Circuit Inspection

  1. Measure resistance between terminals 1 of the HO2S harness connector and 43 of the PCM harness connector.

    Specification: Approx. 0Ω

    Fig 1: Measuring Resistance Between Terminals 1 Of HO2S Harness Connector And 43 Of PCM Harness Connector
    G04810741Courtesy of HYUNDAI MOTOR CO.
  2. Is resistance within the specification?

    YES  : --> Go to "COMPONENT INSPECTION " procedure.

    NO  : --> Repair open in the ground circuit and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About LEMON Manuals