Santa Fe

Remove power mirror switch assembly on driver's door. Disconnect harness connectors. Ensure continuity exists between specified power mirror switch terminals with switch in specified position. See POWER MIRROR SWITCH CONTINUITY TEST (SANTA FE) table. See Fig 1. See WIRING DIAGRAMS . If continuity does not exist, replace power mirror switch.

POWER MIRROR SWITCH CONTINUITY TEST (SANTA FE)

Switch Position ⁽¹⁾

⁽²⁾ Continuity Between Terminals No.

Left Mirror

2 & 11; 5 & 10

Down

2 & 10; 5 & 11

Left

2 & 11; 5 & 9

Right

2 & 9; 5 & 11

Right Mirror

2 & 11; 5 & 13

Down

2 & 13; 5 & 11

Left

2 & 11; 5 & 12

Right

2 & 12; 5 & 11

⁽¹⁾	Continuity should not exist with up/down and left/right switches in off position.

⁽²⁾	See Fig 1. See WIRING DIAGRAMS .

Fig 1: Identifying Power Mirror Switch Terminals (Santa Fe)

Courtesy of HYUNDAI MOTOR CO.