A/C Pressure Transducer Service Procedure (13-HA-001)

A/C PRESSURE TRANSDUCER SERVICE PROCEDURE

TECHNICAL SERVICE BULLETIN

DESCRIPTION:

This bulletin provides important service information to properly remove and install the A/C pressure transducer during A/C system repair.

Applicable Vehicles: 

• All models equipped with an air conditioning system

SERVICE INFORMATION:

1. Refer to applicable Shop Manual to perform the required service work.
2. When removing or installing the A/C pressure transducer, ALWAYS  support the hex portion of the sensor port with an open ended wrench.
   • This prevents any damage to the A/C pipe due to twisting force of the wrench.
     NOTE: Failure to do so may cause damage to the A/C pipe, resulting in leakage of refrigerant.
3. While the sensor port is supported with the open-ended wrench, the A/C pressure transducer can now be safely removed or installed by using a deep socket wrench.
   • Refer to applicable Shop Manual for tightening torque specification.