Seat Back Latch Replacement - Rear

Fig 1: Seat Back Latch Replacement - Rear

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the rear seat back panel. Refer to Trim Panel Replacement - Rear Seat Back . Remove the rear seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Rear .
1	Screws, Rear Seat Back Latch (Qty: 2) Tighten: 11 N.m (97 lb in)
2	Latch, Rear Seat Back Tip: Disconnect the cable from the recliner handle.

Callout

Component Name

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the rear seat back panel. Refer to Trim Panel Replacement - Rear Seat Back .
Remove the rear seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Rear .

Screws, Rear Seat Back Latch (Qty: 2)

Tighten: 11 N.m (97 lb in)

Latch, Rear Seat Back
Tip: Disconnect the cable from the recliner handle.