Power Transfer Unit
WARNING: This page is about a different car, the 2015 Lincoln MKZ. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
- 3.
Remove the rear driveshaft. Refer to: Rear Driveshaft - 3.7L Duratec (227kW/301PS) .
- 4.
- Loosen the clamp, remove the nuts and the CAC inlet tube.
- Loosen the clamp and disconnect the CAC outlet tube.
- 5.
Remove the catalytic converter. Refer to: Catalytic Converter .
- 7.
Remove the front halfshaft RH. Refer to: Front Halfshaft RH .