Accelerator Pedal Module Removal/Installation

WARNING: This page is about a different car, the 2011 Honda CR-V and 2010 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the accelerator pedal module connector (A).

Fig 1: Accelerator Pedal Module Connector And Accelerator Pedal Module With Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the accelerator pedal module (B).
NOTE: The APP sensor is not available separately. Do not disassemble the accelerator pedal module.
Install the parts in the reverse order of removal.