LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2005 >> Element LX, 2.4 YH2, Standard >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Starter Removal and Installation >> Removal

Starter Removal and Installation: Removal

  1. Make sure you have the anti-theft code for the radio, then write down the customer's audio presets.
  2. Disconnect the negative cable from the battery first, then disconnect the positive cable.
  3. Remove the intake manifold (see INTAKE MANIFOLD REMOVAL AND INSTALLATION ).
  4. Disconnect the starter cable (A) from the B terminal, then disconnect the BLK/WHT wire (B) from the S terminal.

    M/T 

    Fig 1: Disconnecting Starter Cable From B Terminal (M/T)
    G03676969Courtesy of AMERICAN HONDA MOTOR CO., INC.

    A/T 

    Fig 2: Disconnecting Starter Cable From B Terminal (A/T)
    G03676970Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Remove the harness clamp (C).
  6. Remove the harness holder (D).
  7. Remove the two bolts holding the starter, then remove the starter.
scientia non olet · About LEMON Manuals