LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> Insight >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> PGM-FI System >> DTC Troubleshooting >> DTC P1106: BARO Sensor Range/Performance Problem (2000-2003 models); DTC P2227: BARO Sensor Range/Performance Problem (2004-2006 models)

DTC P1106: BARO Sensor Range/Performance Problem (2000-2003 models); DTC P2227: BARO Sensor Range/Performance Problem (2004-2006 models)

NOTE:
  • Information marked with an asterisk (*) applies to 2000-2003 models.
  • Information marked with double asterisk (**) applies to 2004-2006 models.
  • Before you troubleshoot, record all freeze data and review the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION ).
  1. Reset the ECM with the HDS (see ECM RESET ).
  2. Start the engine. Hold the engine speed at 3,000 rpm without load (in Park or neutral) until the radiator fan comes on, then let it idle.
  3. Test-drive with the CVT in D position (M/T in 4th gear).
  4. Accelerate for 5 seconds using wide open throttle.
  5. Check for a Temporary DTCs or DTCs with the HDS.

    Is DTC P1106* (P2227)** indicated? 

    1. YES  - Update the ECM if it does not have the latest software, or substitute a known-good ECM; 2000-2001 M/T models (see HOW TO SUBSTITUTE THE ECM FOR TESTING PURPOSES (2000-2001 M/T MODELS) ), 2002-2006 M/T models and CVT model (see ECM UPDATING AND SUBSTITUTION FOR TESTING-2002-2006 M/T MODELS AND CVT MODEL ), then recheck. If the symptom/indication goes away with a known-good ECM, replace the original ECM (see ECM REPLACEMENT ).
    2. NO  - Intermittent failure, system is OK at this time.
scientia non olet · About LEMON Manuals