LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1995 >> Passport LX, RWD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - 3.2L >> Engine Sensors & Switches >> Crankshaft Position Sensor

Crankshaft Position Sensor

NOTE: Crankshaft position sensor malfunctions may set Code 41. For additional testing, see TESTS W/CODES - 3.2L article.
  1. Crankshaft position sensor is located on lower right side of engine block, above oil pan. For testing, disconnect crankshaft position sensor connector at DIS module. Using DVOM, probe terminals B1 and B3. Resistance should be 900-1200 ohms.
  2. If resistance is as specified, go to next step. If resistance is not as specified, check wiring to sensor for open or shorts and repair as necessary. If wiring is okay, replace sensor.
  3. With DVOM connected as in step 1), set DVOM to 2-volt AC scale and crank engine. Ensure reading is greater than .1 volt.
scientia non olet · About LEMON Manuals