A/C Module Inspection
- Turn the ignition switch OFF.
- Connect the A/C control module and disconnect the ambient temperature sensor connector.
- Turn the ignition switch ON. (the engine is OFF)
- Measure the voltage between chassis ground and the signal circuit (+) of the ambient temperature sensor.
Specification: approx. 5V
- Is the result within specifications?
YES
- Check wire harness for contact condition. Then go to "Verification Of Vehicle Repair ".
NO
- Replace the A/C module with an usable one and check for proper operation. If the problem is corrected, replace the module.
- Repair or replace relevant component(s) as necessary and then go to "Verification Of Vehicle Repair ".