"Service Data" Analysis
- Self-Diagnostic connector of the vehicle is connected to the GDS.
- Engine ON.
- Select the "Current Data".
- Check "Unlock button state"
Normal Value: OFF → ON
YES
- After a repair, when the active code were not erased or may be due to temporary malfunctioning of poor contact of the power side.
Overall, check the connector for loose, poor contact, bending, corrosion, contamination, alteration, or damage.
- Repair or replace if necessary, after that please perform "VERIFICATION OF VEHICLE REPAIR'S " procedure.
NO
- Perform "VERIFICATION OF REPAIR " procedure after replacing the knob.
- After a repair, when the active code were not erased or may be due to temporary malfunctioning of poor contact of the power side.