Removal Procedure
- Drain the cooling system. Cooling System Draining and Filling (GE 47716)Cooling System Draining and Filling (Static)
Transmission Fluid Cooler Pipe Nut (1) - Remove [2x]
- Transmission Fluid Cooler Pipe Connector Bolt (2) - Remove
- NOTE:
Cap the fittings and plug the holes when removing the transmission fluid cooler pipes.
Transmission Fluid Cooler Inlet and Outlet Pipe (1) - Remove
- Transmission Fluid Cooler Seal (2) - Remove and DISCARD
- Transmission Fluid Cooler Pipe Seal (3) - Remove and DISCARD [2x]
Fuel Feed and Evaporative Emission Canister Vent Pipe Clip (1) @ Fuel Feed Evaporative Emission Separator Bracket (3) - Remove
- Fuel Feed and Evaporative Emission and Return Hose (2) - Reposition away
Fuel Feed and Return Pipe Clip Bracket Nut (1) - Remove
- Fuel Feed Evaporative Emission Separator Bracket (2) - Remove
- Transmission Fluid Auxiliary Cooler Stud (3) - Remove
Engine Oil Cooler Coolant Inlet Hose Clamp (1) - Disengage - Hose Clamp Replacement Guidelines - Spring Type
- Engine Oil Cooler Coolant Inlet Hose (2) @ Automatic Transmission Fluid Cooling Exchanger - Remove
Engine Oil Cooler Coolant Outlet Hose Clamp (1) - Disengage - Hose Clamp Replacement Guidelines - Spring Type
- Engine Oil Cooler Coolant Outlet Hose (2) @ Automatic Transmission Fluid Cooling Exchanger - Remove
Transmission Fluid Auxiliary Cooler Bracket Nut (2) - Remove
- Transmission Fluid Auxiliary Cooler Stud (1) - Remove
- Automatic Transmission Fluid Cooling Exchanger (3) - Remove