Removal Procedure
- Disable the SIR system. SIR Disabling and Enabling
Front Side Door Trim (3) - Remove - Front Side Door Trim Removal and Installation (Without Front Side Door Trim Bolt Cap) , or Front Side Door Trim Removal and Installation (With Front Side Door Trim Bolt Cap)
Front Side Door Pull Handle Bolt (1) - Remove [3x]
- Front Side Door Pull Handle Bracket (2) - Remove
Route front side door inside handle cable through hole in deflector (1).
- Front Side Door Water Deflector (1) - Remove
Place the front side door window in the full up position.
- Remove the 2 front side door window regulator sash retaining bolts (1).
Remove the front side door window (1) from the door frame.
Disconnect the electrical connector (1).
Remove the 2 front side door window regulator lower access plugs (1).
Mark location of the front side door window regulator lower nuts (1) before removal to aid installation.
- Remove the 2 front side door window regulator lower nuts (1).
Front Side Door Window Regulator Nut (1) - Remove
Remove the 2 front side door window regulator upper access plugs (1).
Remove the 2 front side door window regulator upper nuts (1).
Remove the front side door window regulator (1) through the door panel opening.
- Front Side Door Window Regulator (1) - Remove