LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2010 >> Acadia SL, FWD >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Manifold Heat Shield Replacement - Right Side >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Exhaust Manifold Heat Shield Bolts
    GM1861575Courtesy of GENERAL MOTORS CORP.
  1. Install the exhaust manifold heat shield.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the exhaust manifold heat shield bolts (1) and tighten to 10 N.m (89 lb in).
  3. Install the exhaust flexible pipe. Refer to Exhaust Flexible Pipe Replacement .
  4. Install the HO2S. Refer to Heated Oxygen Sensor Replacement - Bank 1 Sensor 1 .
scientia non olet · About LEMON Manuals