LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Savana H2500, Van Cargo >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Seat Belt Retractor Replacement - Center Rear >> Installation Procedure

Installation Procedure

  1. Install the center seat belt lower belt (3) to the seat cushion frame.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the center seat belt retractor lower bolt (2).

    Tighten 

    Tighten the center seat belt retractor lower bolt (2) to 52 N.m (38 lb ft).

  3. Install the seat cushion cover (1).
    Fig 1: Installing Center Seat Belt Lower Belt & Retractor Lower Bolt
    G02423721Courtesy of GENERAL MOTORS CORP.
  4. Slide the center seat belt retractor into key hole slots in the seat back frame.
    Fig 2: Installing Center Seat Belt Retractor
    G02423722Courtesy of GENERAL MOTORS CORP.
  5. Carefully pull the rear seat back trim down enough to expose the center seat belt retractor bolt hole.
  6. Install the center seat belt retractor bolt.

    Tighten 

    Tighten the center seat belt retractor upper bolt to 52 N.m (38 lb ft).

    Fig 3: Installing Center Seat Belt Retractor Bolt
    G02423723Courtesy of GENERAL MOTORS CORP.
  7. Install the center seat belt retractor trim cover (2).
  8. Install the center seat belt retractor trim cover bolt (1).

    Tighten 

    Tighten the center seat belt retractor trim cover bolt to 1.5 N.m (13 lb in).

    Fig 4: Installing Center Seat Belt Retractor Trim Cover & Bolt
    G02423724Courtesy of GENERAL MOTORS CORP.
  9. Install the center seat belt retractor seat belt opening trim (1).
    Fig 5: Installing Center Seat Belt Retractor Seat Belt Opening Trim
    G02423725Courtesy of GENERAL MOTORS CORP.