LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1997 >> Forward Control 7.4 J >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Engine Controls - Basic Testing - 5.7L) >> Preliminary Inspection & Adjustments >> Mechanical Inspection >> Exhaust System Backpressure

Exhaust System Backpressure

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1996 Chevrolet Chevy Van, 1995 GMC Yukon, 1995 GMC Vandura Special, 1995 GMC Vandura, and 1995 GMC Suburban. However, it is still accessible from the selected car via links, so may be relevant.

Before replacing any components, check exhaust system for restrictions. Use a vacuum gauge or a low-pressure (1-5 psi) pressure gauge to check exhaust system.

If using a vacuum gauge, connect gauge to intake manifold vacuum, and start engine. Observe gauge while holding throttle steady at 2000-2500 RPM. If vacuum gauge reading slowly drops after stabilizing, exhaust system may be restricted.