2.5L (VIN E)
- Set parking brake, block drive wheels and place transmission in Neutral or Park. Warm engine to normal operating temperature. Turn A/C off (if equipped). Ensure SERVICE ENGINE SOON light is off.
- Connect jumper between ALDL connector terminals "A" and "B". SERVICE ENGINE SOON light should begin flashing. Connect timing light.
- Note average timing of cylinders No. 1 and 4 and adjust to specification, if necessary. See 4-CYLINDER IGNITION TIMING . Remove jumper from ALDL connector. Ensure SERVICE ENGINE SOON light is off.
4-CYLINDER IGNITION TIMING (DEGREES BTDC @ RPM)
| Application | Man. Trans. | Auto. Trans. |
|---|---|---|
| 2.5L (VIN E) | 8 @ Idle | 8 @ Idle |