Cooling Fan: Removal
NOTE:
Removal steps in this procedure may contain installation details.
- Remove the LH and the RH front fenders. Refer to: Fender .
- Remove the front bumper cover. Refer to: Front Bumper Cover .
- Remove the washer reservoir. Refer to: Windshield Washer Reservoir .
- Remove the chimney grills.
- Detach the pin-type retainers and disconnect the electrical connectors. Detach the wiring harness grommet.
- Detach the coolant hose retainer.
- Remove the nuts and the cooling fans.
Torque: 97 lb.in (11 Nm)