General Specifications

Item

Specification

Drive pinion flange runout

0.25 mm (0.010 in)

Maximum allowable driveshaft runout ⁽¹⁾

0.50 mm (0.020 in)

Maximum allowable driveshaft runout ⁽²⁾

0.65 mm (0.025 in)

Maximum allowable driveshaft runout ⁽³⁾

0.60 mm (0.023 in)

U-joint operating angle range

0.5°-3.5°

U-joint maximum operating angle

3.5°

Front driveshaft runout

0.76 mm (0.029 in)

⁽¹⁾	All vehicles except vehicles listed below

⁽²⁾	122 inch wheel base 4x2 only

⁽³⁾	145 inch wheelbase 4x4, with 2.7L EcoBoost / 3.5L EcoBoost and Duratec engines, 8.8 inch axle only