Exterior Lighting System
- Specifications
- Description And Operation
- Diagnosis And Testing
- Diagnostic Trouble Code (DTC) Chart
- Headlamps
- Special Tool(s)
- Principles of Operation
- Inspection and Verification
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: Both Low Beams Are Inoperative
- Pinpoint Test B: Both High Beams Are Inoperative
- Pinpoint Test C: One Low Beam Headlamp Is Inoperative
- Pinpoint Test D: One High Beam Headlamp Is Inoperative
- Pinpoint Test E: The Low Beams Are Always On
- Pinpoint Test F: The High Beams Are Always On
- Pinpoint Test G: The Low Beams Stay On When In High Beam Mode/Turn Off With The Flash-To-Pass Feature Active When The Headlamps Are On
- Daytime Running Lamps (DRL)
- Stoplamps
- Turn Signal and Hazard Lamps
- Special Tool(s)
- Principles of Operation
- Inspection and Verification
- Symptom Chart
- Pinpoint Tests
- Parking, Rear and License Plate Lamps
- Fog Lamps
- Special Tool(s)
- Principles of Operation
- Inspection and Verification
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test R: Both Front Fog Lamps Are Inoperative
- Pinpoint Test S: An Individual Front Fog Lamp Is Inoperative
- Pinpoint Test T: The Front Fog Lamps Are On Continuously
- Pinpoint Test U: Both Rear Fog Lamps Are Inoperative
- Pinpoint Test V: An Individual Rear Fog Lamp Is Inoperative
- Pinpoint Test W: The Rear Fog Lamps Are On Continuously
- Reversing Lamps
- Commercial Service Equipment
- Special Tool(s)
- Principles of Operation
- Inspection and Verification
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test AA: The Taxi Roof Lamp Is Inoperative Or Always On
- Pinpoint Test AB: A Customer Access Turn Signal Input Is Inoperative Or Always On
- Pinpoint Test AC: The Customer Access Speed Signal Input Is Inoperative
- Pinpoint Test AD: The Customer Access Power Supply Is Inoperative
- Pinpoint Test AE: The Courtesy Lamps Do Not Turn On From The Customer-Installed Component
- General Procedures
- Removal And Installation