LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Fiesta SES, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.6L >> In-Vehicle Repair >> Engine Mount >> Installation

Engine Mount: Installation

    NOTE: The engine mount studs must be torqued or damage to the powertrain may occur.
    Fig 1: Locating Engine Mount Studs
    G07978654Courtesy of FORD MOTOR CO.
  1. Torque the engine mount studs before installing the engine mount.
    • Tighten to 8 Nm (71 lb-in).
    2. NOTE: Do not loosen the engine mount center bolt or the engine may become improperly positioned.
    Fig 2: Locating Engine Mount And Nuts
    G07978655Courtesy of FORD MOTOR CO.
  2. Install the engine mount and the 2 nuts.
    • Tighten the 2 nuts to 80 Nm (59 lb-ft).
  3. Install the 3 engine mount bolts.
    • Tighten to 48 Nm (35 lb-ft).
    Fig 3: Locating Bolts And Engine Mount
    G07978656Courtesy of FORD MOTOR CO.
  4. Position the degas bottle on the 2 retainer tabs.
    Fig 4: Locating Tabs And Degas Bottle
    G07978657Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals