Safety Belt Shoulder Height Adjuster: Installation
- Install the safety belt shoulder height adjuster in the following sequence.
- Engage the safety belt shoulder height adjuster T-tab to the B-pillar sheet metal.
- Rotate the top of the safety belt shoulder height adjuster up 90°.
- Install the safety belt shoulder height adjuster bolt.
Tighten to 40 Nm (30 lb-ft) .
- Position the D-ring and install the bolt.
Tighten to 40 Nm (30 lb-ft) .
- Install the B-pillar trim panels. REFER to B-PILLAR TRIM PANEL .
NOTE:
Before installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.