Seat Track- Bucket Seat With Console, Second Row

WARNING: This page is about a different car, the 2002 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.

Remove the seat. Refer to the Owner's Literature.
Remove the trim cover screws from each side.

Fig 1: Removing Trim Cover Screws
Courtesy of FORD MOTOR CO.
Using a suitable pin-type retainer removal tool, release the retainers where indicated.

Fig 2: Removing Retainer
Courtesy of FORD MOTOR CO.
Release the seat track adjusting cable from the seat frame.
1. Release the J-clips.
2. Remove the hog rings.
  - Note the number and location of hog rings during removal.
    
    Fig 3: Removing J-Clips And Hog Rings
    Courtesy of FORD MOTOR CO.
Remove the bolts and remove the seat track.

Fig 4: Removing Bolts And Seat Track
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.
Check the active restraint system for correct operation.