LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> ZX2 Standard >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling >> Removal And Installation >> Thermostat >> Installation

Removal And Installation: Thermostat: Installation

  1. To install, reverse the removal procedure.
  2. Fill the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
    Fig 1: Filling Cooling System
    G01371296Courtesy of FORD MOTOR CO.
  3. Start the engine and check all hoses and connections for leaks. Allow the engine to warm up so that the water thermostat opens.
  4. Stop the engine. Top off the coolant recovery reservoir as necessary to maintain minimum cold fill level.
scientia non olet · About LEMON Manuals