LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> ZX2 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 549 (Automatic Transmission) >> In-Vehicle Repair >> Transmission Range (TR) Sensor >> Removal

Transmission Range (TR) Sensor: Removal

WARNING: This page is about a different car, the 2004 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the transmission range (TR) sensor electrical connector and the selector lever cable.
    Fig 1: Disconnecting Transmission Range (TR) Sensor Electrical Connector And Selector Lever Cable
    G03192329Courtesy of FORD MOTOR CO.
    2. NOTE: Failure to hold the shift lever while loosening or tightening the manual shaft lever will transmit rotational torque to the TR switch and shift mechanism.
    Fig 2: Removing TR Sensor
    G03192330Courtesy of FORD MOTOR CO.
  2. Remove the TR sensor (automatic transaxle shown removed for clarity).
    1. Remove the manual control lever.
    2. Remove the bolts.
scientia non olet · About LEMON Manuals