LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Focus ZTS, Standard >> Repair and Diagnosis >> Steering >> Manual Steering >> Power Steering System >> Removal And Installation >> Power Steering Pump Pulley >> Removal

Power Steering Pump Pulley: Removal

  1. Remove the accessory drive belt. For additional information, refer to SPECIFICATIONS & DRIVE BELT ROUTING .
  2. Lower the vehicle.
    3. NOTE: Zetec-E shown, SPI engine similar.
    Fig 1: Removing Power Steering Pump Pulley
    G03431434Courtesy of FORD MOTOR CO.
  3. Using the special tool, remove the power steering pump pulley.
scientia non olet · About LEMON Manuals