LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Excursion 5.4 L, RWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation - Gasoline >> Fuel System >> CMP Synchronizer >> Removal (5.0L)

Removal (5.0L)

  1. Set engine so cylinder No. 1 is at TDC on compression stroke. Disconnect negative battery cable. Disconnect CMP sensor electrical connector. Note position of electrical connector for reassembly reference. Remove 2 screws and CMP sensor.
  2. Place reference marks on camshaft synchronizer housing and engine. Remove synchronizer hold-down bolt and clamp. Remove camshaft synchronizer.
scientia non olet · About LEMON Manuals