Abs Control Module: Removal

Disconnect battery ground cable.
Remove the center instrument panel finish panel.

Fig 1: Removing Center Finish Panel
Courtesy of FORD MOTOR CO.
If equipped disconnect the transfer case rotary control switch electrical connector.

Fig 2: Disconnecting Rotary Control Switch Electrical Connector
Courtesy of FORD MOTOR CO.
Disconnect the two passenger air bag defeat switch electrical connectors.

Fig 3: Identifying Two Passenger Air Bag Defeat Switch Electrical Connectors
Courtesy of FORD MOTOR CO.
Remove the steering column cover trim panel.

Fig 4: Removing Steering Column Cover Trim Panel
Courtesy of FORD MOTOR CO.
Remove the headlamp switch. Refer to HEADLIGHT SWITCH under REMOVAL & INSTALLATION in INSTRUMENT PANEL - ANALOG article in ACCESSORIES & EQUIPMENT.
Remove the LH instrument panel finish panel.
1. Remove the screws.
2. Remove the instrument panel finish panel.
  
  Fig 5: Identifying LH Instrument Panel Finish Panel
  Courtesy of FORD MOTOR CO.
Remove the instrument cluster panel.
1. Remove the screws.
2. Remove the instrument cluster panel.
Remove the anti-lock electronic control module.
1. Remove the two anti-lock electronic control module bolts.
2. Remove the anti-lock electronic control module.
3. Disconnect the anti-lock electronic control module electrical connector.