LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Tempo Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats - Power >> Testing >> Seat Track >> Removal & Installation

Removal & Installation

  1. Remove insulators (if equipped). Remove nuts or bolts retaining seat track to floor. Lift seat and detach motor wires. Remove 2 bolts attaching seat belts to floor and disconnect wiring connector. Remove seat from vehicle.
  2. Remove side cover from seat. Remove 2 recliner mechanism retaining bolts. Remove seat back from track. Remove track retaining bolts. Remove seat track. To install, reverse removal procedure. Check operation of seat in all directions.
scientia non olet · About LEMON Manuals