LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1996 >> Vision TSi >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Brake System >> Removal & Installation >> Controller Anti-Lock Brake (Cab) >> Removal

Controller Anti-Lock Brake (Cab): Removal

  1. CAB is located in engine compartment, next to HCU. See Figure . Remove HCU to obtain enough clearance to disconnect CAB from HCU. See HYDRAULIC CONTROL UNIT (HCU)  under REMOVAL & INSTALLATION.
  2. Remove CAB-to-HCU bolts. Remove CAB from HCU by pulling it straight out of connector on HCU. DO NOT twist CAB during removal from HCU.
scientia non olet · About LEMON Manuals