Interior Light Test 5A - Illuminated Entry Inoperative

WARNING: This page is about a different car, the 1996 Plymouth Breeze, 1996 Dodge Stratus, and 1996 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Perform INTERIOR LIGHT TEST 1A before proceeding with this test. For connector terminal identification and wiring diagrams, see CONNECTOR IDENTIFICATION section in this article. Perform VERIFICATION TEST VER-1A after each repair.

CAUTION: Always turn ignition switch to OFF position prior to disconnecting or connecting any module connector.

NOTE: Illuminated entry will only operate when activated by Remote Keyless Entry (RKE) transmitter.

Ensure dome light switch is in the middle position before proceeding. Using scan tool, actuate courtesy light. If dome light does not come on, go to INTERIOR LIGHT TEST 2A. If dome light comes on, stop actuation. If RKE is not operating properly, go to POWER DOOR LOCK TEST 8A. If RKE is operating properly, replace BCM.