Engine Oil Replacement Reminder Reset - Procedure 01

NOTE: On some vehicles Procedure 02 may also reset the Engine Oil Replacement Reminder.

NOTE: The Oil Change Required message can be temporarily turned off by pressing and releasing the Trip Odometer button in instrument cluster.

To reset oil change indicator after performing scheduled maintenance:

Turn ignition to ON/RUN, with engine OFF.
NOTE: On vehicles with keyless START, without pressing the brake pedal, push the ENGINE START/STOP button and cycle the ignition to the ON/RUN position (DO NOT START the engine).
Fully depress accelerator pedal slowly 3 times within 10 seconds.
Turn ignition to OFF/LOCK.
NOTE: On vehicles with keyless START, without pressing the brake pedal, push the ENGINE START/STOP button once to return the ignition to the OFF/LOCK position.
Start engine. If indicator message illuminates when engine is started, repeat reset procedure.