LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> 1500 HFE >> Repair and Diagnosis >> Engine Performance >> System >> 3.6L - DTCS P0601 To P105C - 1500 >> DTC Troubleshooting >> P0602-Control Module Programming Error/Not Programmed >> Diagnostic Test

Diagnostic Test

CONTROL MODULE PROGRAMMING ERROR 

NOTE:

Controller is programmed with generic software and will not allow the correct vehicle Powertrain management.

  1. With the scan tool.
  2. Record the vehicles controller part number.
  3. Select Use Controller Part Number under the Flash Tab.
  4. Flash the controller with the correct software.

    Verify the controller flashed successfully.

    Test Complete 

scientia non olet · About LEMON Manuals