LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2008 >> Nitro SXT, RWD, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection - 2.8L Diesel >> Sensor-Mass Air Flow >> Installation

Sensor-Mass Air Flow: Installation

Fig 1: Removing/Installing Intake Air Pressure & Mass Air Flow Sensor
GC0062767Courtesy of CHRYSLER LLC
  1. Check condition of sensor O-ring.
  2. Position MAF sensor (2) into top of air cleaner cover (1) with a slight twisting action.
  3. Install mounting screws.
  4. Install MAF electrical connector.
scientia non olet · About LEMON Manuals