LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2006 >> Charger SE >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Vehicle Theft Security System (Service Information) >> Intrusion Module - Export >> Removal

Intrusion Module - Export: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the glove box (Refer to BODY/INSTRUMENT PANEL/GLOVE BOX - REMOVAL) .
  3. Reach up behind the instrument panel and remove the two retaining screws to the intrusion module.
  4. Disconnect the electrical connector to the intrusion Module.
  5. Remove the module from the instrument panel.
scientia non olet · About LEMON Manuals