LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1994 >> Caravan Base, 3.3 J >> Repair and Diagnosis >> Body & Frame >> Seats - Power >> Testing >> Motor Test >> Front Motor

Front Motor

  1. Remove switch from mounting position and disconnect switch from harness. See SWITCH R & I  under REMOVAL & INSTALLATION.
  2. Connect jumper wire between terminals No. 2 and 12. See Figure . Connect a second jumper wire between terminals No. 1 and 11. If motor does not operate, reverse jumpers (No. 2 to No. 11 and No. 1 to No. 12). If motor still does not operate check wiring between switch connector and motor assembly. If wiring is good, replace motor assembly.
scientia non olet · About LEMON Manuals