Points Of Removal

Step 9: Removing Steering Lock Cylinder

Insert ignition key into ignition steering lock cylinder and turn to the "ACC" position. Using a small cross tip (+) screwdriver or similar tool, push the lock pin of the cylinder inward. While pushing on the pin, pull outward the cylinder. See Fig 1 .

CAUTION: DO NOT hammer on steering wheel to remove, doing so may damage the collapsible mechanism.

Step 11: Steering Wheel
Make mating position of steering wheel and steering wheel shaft. Remove steering wheel using a steering wheel puller. See Fig 2 .

Fig 1: Removing Ignition Steering Lock Cylinder

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Removing Steering Wheel

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.